DIY · Uncategorized

Command Centre

 

A lot of my work is done at home – I write a lot for the local newspaper, my food blog and some of the clients I have. I have a lovely office and I have my diary (a real one as I don’t like online/computer calendars – it’s a personal thing). Very often, I get a phone call asking me if I would be free to attend this or that event or would I be free to MC an event. I then have to look for my diary, flip the pages quickly to see if I have any commitment on that day.

After a while, I grew tired of this and I considered ways of making access to this type of information more accessible. Looking through Pinterest (and losing hours over this), I found several ideas of so-called Command Centres. This is what I needed. As my desk is towards a wall and I have a shelving unit on the other wall, I wasn’t able to just screw something to the wall so needed to think outside the box. And here is what I came up with – rather than having individual items on a wall, I decided to create a board on which everything is placed, hanging on a rail on my shelving unit so that I can move the command centre along the shelf when I needed something from behind. All the measurements below are based on my needs – you might need different ones.

Command Centre

You need:

  • 1 sheet plywood 1cm thick measuring 50cm x 70cm
  • Sanding paper, different grade from rough to fine
  • Satinwood paint black (you don’t need much)
  • A brush
  • A blackboard measuring 21cm x 29cm (got it from a discount store and painted the frame in copper-gold)
  • A pinboard measuring 24.5cm x 24.5cm (also from a discount store)
  • A pad of monthly planner measuring A4 size (I got mine from Sostrene Grene in Cork)
  • A strip of magnet
  • 3 magnets
  • 3 pegs (I got mine in Tiger Store in Cork)
  • 2 hook screws
  • nails
  • hammer
  • 1 rail measuring longer than your board with hanging hooks (I got mine from Ikea)

I took the sheet of plywood and drilled a hole on either side of the top sheet large enough so that the hooks from the rail fit through and sanded it down with a rough sanding paper first before using the fine grade one. I didn’t need it to be perfectly smooth. I then painted it with black satinwood paint (I added two coats to make sure it was all nicely covered), covering also the sides.

 

Measuring the items that needed to go on the board, I nailed the balckboard directly onto the black plywood. Next to it, I added the pinboard (I drilled a hole in the middle and used a hookscrew to fix the board to the plywood.

I then drilled a hole on either side of the planner pad, large enough to hang on the hookscrew. I held the pad in position on the board, marked the holes and srew in a hookscrew so that I was able to hang the planner pad in position.

I then added three pegs (I used first doublesided tape but that didn’t last long after I added a photo to the pegs, so used hot glue in the end) and glued the magnet strip and added the three magnets.

I had a craft magazine that had pop-out bunting (it’s a few years old actually), so I used the triangles to complete the bunting and hung in on top of the command centre.

And et voila, when someone calls now, I just have to turn around to check if I am free on a certain day. I use the blackboard to keep track of my projects and the pinboard for anything that might float around the desk otherwise.